Product Description
Local Pickup Available on this item
Please call to check Availability
"Please add a note at checkout if you need with or without sensor hole"
also its made to cover key hole on models with key entry for cleaner look.
Fitment:
For 2016-2021 Honda Civic 10th Gen (2dr, 4dr and Hatchback)
Installation:
Easy installed and No modification needed,Adhesive installation, comes with double-sided adhesive tape.
1. Please clean the surface before installation.
2. Compare the position and adjust it.
3. Make sure the Temperature is not too low,if it is in Winter when your installation,please make the carbon fiber warm by Hot air blower，so it will be soft and easy to be installed.
4. Tear off the sticker and stick it.
5. Press it to make it stick strongly.
Fitting
1. Remove all dust and grease from the application area.
2. Use 3M General Purpose Cleaner and Wax Remover or other mild solvent, such as White Spirit applied with a clean cloth.
3. Indirectly heat the trim cover and car bodywork using a hairdryer to 30 degrees Celsius, in order to achieve an improved instant bond.
4. Remove outer covering from tape to expose sticky side.
5. Apply molding (with tape applied) to the desired area of the car body.
6. Buff down hardly after applying.
7. 24 hours before washing your car.
